CIOKS DC10 Power Supply 8 Isolated Sections 9V 12V 15V (open box)

This listing is for an open box item. All of the original contents, packaging, and warranty are included. The packaging has been opened and may show wear, however, the contents are in new condition.

CIOKS DC10

Power Supplies

DC10 is a multi-output power supply for effect pedals based on a toroidal transformer. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA, it’s a perfect solution for bigger rigs with DC pedals only.

The three powerful sections with 400mA each will power pedals with special requirements like Strymons, Eventides, TC Electronic Nova-series pedals or TC Helicon pedals, Moogerfoogers, Radial Tonebone pedals or others without the need of special cables. Selectable with a switch, DC10 offers voltages 9, 12, and 15V, and combined with the included Stack Flex or Series adapter Flex also 18 and 24V. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V low current pedals.

About the DC10

Features

• 10 outlets configured in 8 isolated sections
• Toroidal transformer with additional electromagnetic field shielding
• 3 powerful DC sections with 400mA each
• 15V option for Radial Tonebone pedals
• Short circuit protection of all outlets
• Advanced LED monitoring of each section
• Temperature monitoring
• 120 or 230V mains voltage operation
• A total of 16 Flex cables included
• Split Flex for powering two pedals off one outlet included
• Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
• Compatible with Pedaltrain and Temple Audio pedalboards
• Mounting bracket and all pedalboard mounting hardware included
• 5 years worldwide warranty period

Specifications

• Outlet 1-4: 9V DC / 100mA each
• Outlet 5-6: 9 or 12V DC / 200mA each*
• Outlet 7-8: 9 and 12V DC / 400mA
• Outlet 9-10: 9 and 12 or 15V DC / 400mA
• Size: 158x98x35mm (excl. detachable rubber feet)
• Weight: 1.1kg
• *can be merged into a 400mA section

What's in the box

• CIOKS DC10 power supply
• Mains power cord

16 Flex cables:

• Type 1 – black with 5.5/2.1mm center negative DC plug x8
• Type 2 – red with 5.5/2.1mm center positive DC plug x1
• Type 4 – green with 5.5/2.5mm center positive DC plug x2
• Type 5 – black with 3.5mm tip positive Jack plug x1
• Type 6 – black with 9V battery clip x1
• Split Flex type 1 – black, powers two pedals off a single outlet x1
• Stack Flex type 1 – white/black, adds voltages of two outlets x1
• Series Adapter Flex – white, adds voltages of two outlets x1
• Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and hex key
• Manual
• Product sheet (drill guide)
• Flex guide