EQD Time Shadows II Subharmonic Multi-Delay Resonator Pedal

Time Shadows II

The latest EarthQuaker Device is actually the same as the latest Death By Audio device. This new pedal is a joint collaboration that brings their sonic soundscape trips to your melted mind.

With the switch to the left, Time Shadow's controls are completely the brainchild of EarthQuaker Devices resident genius Jamie Stillman. Flip the switch to the right, and you enter the head of the madman Oliver Ackermann from Death By Audio, barely clutching to reality. Place the switch in the middle and enter a whole new realm of pitch-warping delays brought to you by a telepathic mind meld with a 5th-dimensional dream being.

All three sounds are wildly different from each other and yet share a perfectly designed harmony to be completely complementary and suitable for every style and genre of music. The EarthQuaker Devices side transforms whatever you play into the sound of a jazz space bazooka! It's a pitch-morphed fuzz delay filter with so much attitude that you are actually intimidated. It takes the input signal, blows it out with the power of digital distortion, blends it with a polyphonic sub octave, feeds it into a delay, then spits it out into a highly resonant envelope-controlled lowpass filter.

The Death By Audio side is a multi-delay filter remorphinator that goes from icy shimmers to cosmic space caves of bouncing repeats. The middle position is an energy beam that brings your earthly transmissions repetitively closer to the heavens while simultaneously diving deep into the hells. In addition to all this madness, we also bring you a user-assignable expression jack and 6 preset slots to save and recall your favorite settings!

With these three unearthly delights, you should have everything you need to break brains and destroy monotony! Each Time Shadows was lovingly built by druids with very soft hands in the tiny hobbit hole of Akron, Ohio.

Controls

• All three modes share the same simple controls: Time, Span, and Filter. While they control the same parameters, you’ll get wildly different results in each mode.
• Time: Controls the Delay Time.
• Span: Controls the intensity of repetition.
• Filter: Arguably the most fun control on Time Shadows! On the EQD side, this controls an envelope for the filter frequency and a gate for the cutoff to the input of the delay. On the DBA side, this controls the filter frequency as well as the shift point of a precisely phased delay line for pole zero interpolation. In the magic middle position, this controls the mix.

Pro Tips
Since there is an envelope component to this effect, the input level will play a role in frequency response. Some of the most fun can be had with short delay Time and high Span settings while manipulating the Filter control.

Global Features
Time Shadows has two operating modes which are indicated by the color of the Save/Recall switch:

• Green = Live Mode: The pedal will operate exactly where the controls are set, and any changes will have no effect on the presets unless saved. The Save/Recall switch will stay static green.
• Red = Preset Mode: Time Shadows will operate in a stored preset mode which is selected by the preset switch and the physical settings of the control will be ignored. The Save/Recall switch will stay static red.

Time Shadows comes factory set to start up in Live Mode.

Presets
Time Shadows has six available preset slots for you to save and recall your favorite settings. The settings for each of the three controls, the mode switch, and the expression jack assignment can be saved and recalled in any of the slots.

Saving a Preset:

• Turn the Preset rotary switch to the desired location you wish to save your preset.
• Dial in the settings you want to save. Remember, expression pedal assignment and modes can also be saved!
• Hold the Save/Recall switch down until the LED flashes between green and red and then release.
• Your preset is now saved!

Recall a Preset:

• Select the desired preset you wish to use with the Preset selector switch and do one of the two following actions:
• When the pedal is activated and the effect is in use, hold down the foot switch for at least 0.75 seconds, and it will switch from Live Mode to Preset Mode. You can switch between Live and Preset mode on the fly!
• Tap the lighted Save/Recall switch. The switch will turn from green to red, indicating you are now in preset mode. Tap again and the switch will turn from red to green, indicating you are in live mode.

Edit/Overwrite a Preset:

• Once in Preset Mode (the lighted Save/Recall switch will be red), make the desired changes to any of the controls in the selected preset. The Save/Recall switch will begin to flash red, indicating a change has been made to the stored preset. Any controls that are not changed will remain as previously saved.
• Hold the Save/Recall switch down until the LED flashes between green and red and then release.
• The save switch LED will return to static red, and the previous preset has been overwritten.

Helpful Preset Tips:

• Different EXP assignments can be saved in each preset!
• Presets can be stored and overwritten when Time Shadows is in Live or Preset Mode.
• To make changes to an existing preset, you must first be in Preset Mode before making the desired changes.
• There is no undo for preset saving, so make sure you are not overwriting your favorite sound, especially when you are saving presets from Live Mode!

Expression Control
Use any TRS expression pedal to take control over the Time, Span, or Filter! Time Shadows ships with the EXP jack mapped to the Span control. Follow these steps to reassign the EXP functionality:

• Insert the expression pedal TRS plug into the EXP jack.